turbo mill

mmc - magnetic milling chucks

Powerful Magnetic Holding for Conventional Milling and CNC Machining Centers (Vertical or Horizontal)

the perfect set-up time reduction solution

Walker Turbo-Mill MMC Magnetic Milling Chucks eliminate the use of traditional clamping methods in CNC machining center and milling operations. You don't need clamps or fixtures of any type. The applications shown in this demonstration are Profiling, Face Milling, Plunge Milling, Slotting, Drilling, and Non-magnetic Workpieces. Click Image to See Movie

profiling

This profiling cut is cutting .500 inch deep and cutting .250 inch into the workpiece. We are using a 1.0 inch diameter cutter with two inserts. The cutter is running at 2200 RPM with a 20 IPM speed.

face milling

A 4.0 inch cutter is taking a 2.0 inch wide cut .500 inch deep. The cutter has 6 inserts and is running at 800 RPM with a feed of 15 IPM.

slotting

In this picture a 1.0 inch diameter cutter with two inserts is milling a .250 deep slot in a piece of 4140 material. The cutter is running at 2000 RPM at a speed of 20 IPM.

drilling

Through drilling is made easy when your workpiece is on riser blocks. Here a 1.500 inch diameter drill will go through the workpiece but will not harm the chuck's magnetic surface.