Click here to return to the Main Page
 
Click here for the Walker Magnetics emails and contact page
Click here to go to the Walker Magnetics International page Click here to learn about O.S. Walker The Main Products and Services Page Walker Information Center Click here for the latest Walker News Click here to contact OS Walker

standard lift magnets

 

neo-hv series
Permanent Magnetic Lifting Magnets for vertical loading onto machine centers and lathes

NEO-HV Series Magnet lift horizontal to vertical

These NEOHV lifting magnets are designed to lift loads from the horizontal position into the vertical and vice-versa.

Imagine you have a plate lying on a pallet and you want to put it onto your horizontal machining center.

Operators have to do this many times a day and they usually have to struggle with clamps, slings or chains, often needing two people, to turn and keep the component in position.

Three standard models are available: NEOHV -250, NEOHV-500 & NEOHV-1000 with maximum lifting capacities of 550, 1100 and 2200 lbs. on flat AISI 1020 steel.

NEO-HV Lift Magnet

NEOHV lifting magnets are adjustable to accommodate a range of flat plates & flat circular disks.

Lifting arms, HV-250, HV-500 and HV-1000 can be purchased separately and retrofitted to a NEO-250, NE0-500 or NE0-1000 lifting magnet.

Recommended Applications
The NEO series permanent lifting magnets requires good surface conditions to achieve maximum lifting capacity. Thanks to Neodymium magnets they perform quite well on flat non-machined surfaces with some rust or scale. The NEOHV model is ideally suited for in-plant handling, loading und unloading machine tools with a horizontal spindle and for plate handling in warehouses.

NEO-HV Lift Magnet

Workload Limit (Rated Lift Capacity)
The maximum lifting capacity is based upon lifting clean, smooth, flat, low-carbon (AISI 1020) steel plate, 3 inches or thicker with the full area of the magnet's poles in contact with the load. Derating is required for plates or flat material with rust or scale, non-machined or uneven surface, plates thinner than 3 inches and alloy steels. Refer to the operator's manual for more detailed workload limits.

standard features

  • Uses Standard NEO-250, NEO-500 or NEO-1000 lifting magnet
  • Detachable lifting arm HV-250, HV-500 and HV-1000
  • Meets all the requirements of ANSI/ASME B30.20 (safety standard)
  • Supplied with manual, pull test certificate, video, and safety poster.

specifications


model no. rated lifting capacity length width height weight
NEO-HV 250 0 - 550 37.7 8.3 10 60
NEO-HV 500 0-1100 45.6 10.8 10 86
NEO-HV 1000 0-2200 47.7 13.6 12.2 158
 
replacement parts
NEO Replacement Parts - PDF NEO Manual - PDF