Click here to return to the Main Page
 
Click here for the Walker Magnetics emails and contact page
Click here to go to the Walker Magnetics International page Click here to learn about O.S. Walker The Main Products and Services Page Walker Information Center Click here for the latest Walker News Click here to contact OS Walker

standard lift magnets

 

CM-400, CM-800 TOTERS

CM800 Toter magnet

The TOTER is a compact, self-contained, lifting magnet which uses permanent magnets that maintain holding power indefinitely. Within the steel housing are powerful ceramic magnets whose field is controlled by the "on-off" position of the handle. Because no electric power is required, TOTERS can operate completely free of the restriction of power cords, and can be used where electric power is not readily available.

Recommended Applications
Permanent lifting magnets require good surface conditions to achieve maximum lifting.The TOTER is ideally suited for in-plant handling, loading, and unloading machine tools, and is commonly found in industrial plants, machine shops and warehouses.When greater holding capacity is required, refer to our battery magnets or our circular electric magnets.

Rated Lift Capacity
The maximum rated lift is based upon lifting clean, smooth, flat, low-carbon steel plate, 1 1/2" or thicker with the full area of the magnet's lifting surface in contact with the load. Derating is required for plates with rust or scale, plates thinner than 1 1/2", and alloy steels. More detailed ratings are contained in the OPERATOR'S MANUAL AND SAFETY INSTRUCTIONS.

standard features

  • High strength steel bail
  • Operating mechanism moves on bearings for ease of operation
  • Specially shaped pole shoes ensure the full magnetic field is directed into work piece
  • Operating handle plunger must be fully depressed to prevent accidental operation
  • Handle locks in "On or Off" positions to prevent unintentional operation
  • Meets all the requirements of ANSI/ASME B30.20 (safety standard)
  • Supplied with manual, pull test certificate, video, and safety poster.

specifications


model no. length width height to crane hook net weight shipping weight
CM-400 7.64" (194mm) 5.67" (144mm) 12.4" (315mm) 72.6 lbs. (33kg) 80 lbs.
(36kg)
CM-800 10.95" (278mm) 7.56" (192mm) 15.55" (395mm) 169.4 lbs. (77kg) 175 lbs. (80kg)
 
performance ratings on risi 1020 steel
CM-400 0-880 lbs. (0-400 kg) Rated Lift
CM-800 0-1760 lbs. (0-800 kg) Rated Lift
 
replacement parts
CM Replacement Parts - PDF (12 KB) 
 
MANUAL
CM Manual - PDF (1 MB)