circular grinding
neogrip
Circular permanent magnetic chucks
for grinding
All steel poles can be drilled and tapped up
to 15 mm deep to accomodate driving pins, stops or other jigs
and fixtures.
Holding force can be reduced during set-up to aid workpiece
centering.
features
- Double pack of Neodymium magnets provides high holding power
- Balanced design allows high turning speeds
- Very low magnetic field
- Low construction height
- To accommodate driving pins, stops and other jigs and fixtures, all steel poles can be drilled and tapped up to 15 mm deep
- Hole diameter may not exceed width of pole
- For repetitive work, additional top plates can be purchased
- Usable top plate life: 7mm
- Nominal holding force: 80N/cm2
- Holding force can be reduced during setup to aid workpiece centering
specifications
| code |
dia
(mm) |
height
(mm) |
pitch
dia
(mm) |
mounting
holes |
weight
(kg) |
 |
click here to download brochure |
|
| 15.00.100 |
100 |
50 |
86 |
M6 X 12(3) |
3 |
| 15.00.130 |
130 |
50 |
120 |
M6 X 12(4) |
5 |
| 15.00.150 |
150 |
50 |
137 |
M8 X 16(4) |
7 |
| 15.00.200 |
200 |
50 |
182 |
M8 X 16(4) |
12 |
| |
|
